Pumptec 81401 217V Pump With Motor (Side Ports) Kaivac Replaces 81254
217V-085-M9253 Pump Head Kit with motor includes parts below: Pumptec 217V Pump Head Only 60063 (Side Ports) Kaivac Please note to use as a replacement on a Kaivac you will have to re-use the pump front face plate off the original pump. Note the original is a 2 port head and this is a side port in and out connection. The front place is easy to change out by just removing the two bolts on the rear of the pump head. Compare to Kaivac PM217 Pumptec: Repair Kit “C” Cam Bearing for 400-500 Psi Models 204V, 205V, 207V, 217V .085 Stroke Replaces 0100-6005-0095 Pumptec: M9253F Motor Only Replaces the Old M53 Bridge Rectifier for Edic, PumpTec, Burnishers, & More Pumptec Kit, Base Mounting Plate / Bracket For M20/M53/M54 Motors Note: to use in a Kaivac cleaning machine you just un-bolt the front head and re-use the front head face plate from your original pump. This way the water goes in and out through the front and not the sides. This is super easy to do, as you just remove the head from the motor and then remove the two bolts on the back of the pump to remove the front face plate off the pump. The above procedure will save you over $200 over purchasing the same pump with the pre-drilled and tapped holes in the front of the pump. Compare to: Kaivac PUMPSPARE217 0205-1000-0006 Part Number 60063 Max Pressure (psi) 500 Open Flow (gpm) 2.5 Seals V-Ring O-rings Buna Plunger 305 SS Inlet Ports (2) – 1/4″ NPT (F) Discharge Ports (2) – 1/4″ NPT (F) Max Fluid Temp. (℉) 140 RPM 2000 Body Anodized Aluminum Valves Stainless Steel Color Gold Fasteners Stainless Steel