Reid Works

Protecta LP Tamper Resistant Rat Mouse Baiting Station Rat Baiting Box Black

PROTECTA LP – Low Profile Rat Mouse Baiting Station – 1 Station This listing is for 1 protecta lp baiting station. Patented “Low Profile” Baiting Station PROTECTA LP is a triangular shaped, rat-size baiting station that fits in corners and flush along walls where rats travel. Its “Low Profile” makes it ideal to use indoors under pallets and in other tight baiting locations. It measures 13″ across, 3 3/8″ tall by 9″ deep (approx. 76mm x 228mm). Patented interior baffles lead rats directly to the feeding receptacle in PROTECTA LP which can hold Bell’s Blocks and Super-Size Blocks, tracking powders, liquids and place packs. blocks fit on horizontal and vertical baiting securing rods that help keep blocks securely in the station. This tamper-resistant baiting station locks automatically when closed and unlocks with a special 2-prong key that also opens other Bell baiting stations. A one-piece liner makes cleaning and re-baiting easy. Service time is reduced because of its easy accessibility. Especially good in wet areas; blocks are elevated and water can drain Location of baiting chamber prevents blocks from falling into the runway holesIncludes: One Protecta 2-prong key per order, vertical and horizontal rods for each station

Protecta EVO Ambush Rat Baiting Station ( 6 Stations) Rat Mouse Control Station

Protecta Evo Ambush Rat Baiting Station – 6 Stations This listing is for 6 Protecta Evo Ambush Rat Baiting Station The “evolution” of Bell Laboratories’ new, time-saving Protecta EVO baiting station line continues with the introduction of the company’s most advanced, low-profile baiting station, Protecta EVO AMBUSH. Protecta EVO AMBUSH, like the popular Protecta LP, sits low to the ground, ideal for use in pallets, shelving and other out-of-the-way spots where rats and mice travel. The station measures approximately 10″ (l) x 8 1/4″ (w) x 4 1/8″ (h), [25cm (l) x 21cm (w) x 10cm (h)] – slightly higher than the Protecta LP to accommodate the T-REX Rat Snap Trap. The station’s single-locking mechanism, a mark of the EVO line, lets technicians unlock the station in a single stroke, yet provides a high degree of tamper-resistance. The EVO key unlocks any EVO baiting station. And, inside the station, Bell has designed a removable baiting tray with rounded corners for easy cleaning. The biggest time-saver, however, comes when technicians secure the station. Opening to the side, EVO AMBUSH can be anchored to Bell’s SIDEKICK LOAD-N-LOCK system for secured placement. The system, which is weighed down with two standard concrete bricks, eliminates the added time, expense and mess associated with traditional anchoring methods. As an added benefit, LOAD-N-LOCK’s ramped entry elevates EVO AMBUSH which helps keep baiting blocks dry in water-prone conditions. Protecta EVO AMBUSH holds four 1-oz. (28g) baiting BLOX or a T-REX Rat Snap Trap or MINI-REX Mouse Snap Trap. Four vertical baiting rods lock in place and won’t fall out during servicing. A bar code installed inside the lid is compatible with management software. A service card can also be placed in a card slot inside the station or affixed to the outside. Made of 100 percent recycled, heavy-duty, injection-molded plastic, EVO AMBUSH can withstand the rigors of baiting outdoors and in. It is designed to meet EPA-established protocols for Tier 1 distinction, the highest level of tamper-resistance to both children and dogs, as well as weather resistance. Includes 4 rods for each station, removable insert for each station, and one key per order

Protecta Sidekick Rat Mouse Baiting Station Mouse Rat Control Baiting Station

Protecta Sidekick Rat Mouse Baiting Station 1 Protecta Sidekick Baiting Station One Protecta Key is included with each order. We do sell Protecta Keys separately if you would like more than one. ebay item # 385053376887 Baiting Blocks show are not included – this listing is for the sidekick stations only This listing is for 1 Protecta Sidekick Rodent Rat Mouse Baiting Station. PROTECTA Sidekick is an economical way to upgrade from using non-tamper-resistant baiting stations to the security and high quality of tamper-resistance. It locks when closed and unlocks with Bell’s two-prong PROTECTA key. Constructed from impact-resistant, injection-molded plastic, Sidekick holds up well in temperature extremes. In the field, it works as both a baiting station and a monitoring station. Vertical baiting securing rods hold Bell’s BLOX securely in the station. As a monitoring station, it holds TRAPPER T-Rex Rat Snap Trap which captures rats as they enter the station. Easy-to-use Sidekick opens to the side for fast, convenient servicing, even when the station is secured. Its interior corners are rounded for easy cleaning, and a built-in card slot holds the PROTECTA service card. Sidekick measures 9 1/2″ x 8 3/4″ with a height of 4 1/2″ (approx. 241mm x 222mm x 114mm), ideal for fitting into tight baiting locations. Yet, Sidekick can hold up to two pounds or almost 1 kg of baiting blocks. Baiting blocks shown are not included Includes: One Protecta 2-prong key per order, four vertical baiting securing rods Tamper-resistant Holds 8 Blox and T-Rex Rat Trap Slot for service card

Protecta Landscape Rat Mouse Baiting Station Granite Color ( Case of 4 Stations)

Protecta Landscape Baiting Station – Granite Color ( Case of 4 Stations) ( Does not include baiting blocks) This listing is for 4 Protecta Landscape Baiting Station – Granite ( Does not include baiting blocks) Looks Like A Rock, Acts Like A Baiting Station Looking every bit like a rock, PROTECTA Landscape is a rat-size baiting station designed to blend in with outdoor environment. Its realistic colors – sandstone and granite – and naturally textured surface give this baiting station the authentic look of a rock. When closed, tamper-resistant PROTECTA Landscape locks automatically and opens with the standard two-prong PROTECTA key. Servicing the station is easy with the built-in service record card holder, one-piece liner and its side-opening design. Four vertical baiting block securing rods hold eight 15g, 20g or 28g/1 oz. BLOX securely in the station. It also holds a TRAPPER T-Rex Rat Snap Trap. This station is made of heavy-duty, injection-molded plastic with a durable hinge built to withstand frequent servicing. PROTECTA Landscape delivers superior durability that PMPs have come to expect in Bell’s tamper-resistant baiting stations. 1 EVO Key is included with each order. We do sell EVO Keys separately if more keys are needed ( ebay item # 381039580543 ) Baiting Blocks are Not Included – Must be purchased separately OLD Landscape Baiting Stations use the Protecta Keys ( ebay item # 381039534363 ) Dimensions: 13″ L x 11″ W x 8″H