CRC HydroForce All Purpose Degreaser 18oz Aerosol Can Lot of 2 NSF Industrial
CRC HydroForce All Purpose Degreaser 18oz Aerosol Can Lot of 2 NSF Industrial Condition: New unused— light surface wear with minor rust spots at the top rims and small scuffs; Features: All purpose industrial-strength degreaser, aerosol spray; NSF Nonfood Compounds Program Listed C1 Color: Purple label on metal can Perfect for: Industrial, automotive, shop and parts degreasing, general heavy-duty cleaning See photos for close-up of condition and accurate sizes.
HydroForce AS08 Injection Prespray Sprayer Pro A70109 carpet cleaning
HydroForce AS08 Injection Sprayer Pro A70109 UPC 768724753175 Description Pre-spray 10 times faster than a pump up sprayer! Finish Jobs Faster with Hydro-Force Injection Sprayers! For those that demand the best, the Hydro-Force Injection Sprayer Pro has all the great features you’ve come to expect along with a new 5 qt. container that makes the best sprayer in the industry even better! You can cut your spray time in half and quickly apply carpet presprays, deodorizers, tile and grout cleaning solutions, sanitizers, protectors and more. Features NEW, patent-pending container design makes the Hydro-Force sprayer the most convenient sprayer on the market. Large side-fill port – refill without removing the injector assembly Wand holder to keep your wand off your customer’s floor Operating pressure range of 100-1,000 PSI Eliminates annoying mixing required by pump up sprayers High-quality quick connects allow your gun to swivel and permits quick removal Specification Sprays solution at either 1 to 8 or 1 to 4. Includes a 5 qt heavy duty roto mold jug that you can fill from the rear or side w/qt. measurement markings Jug is over twice a thick as standard blow molded jugs – designed to last a life time! Spray gun rated at 2600 PSI and 7 GPM Chemically resistant seals 18″ stainless steel wand Tethered cap Compare to current or past OEM associations A70109 AS08 UPC 768724753175 Additional Information General Function: The Hydro-Force Injection Sprayer is based upon an injection system that consists of a specially designed valve that injects a concentrated chemical into the high-pressure water flow from the machine. Hydro-Force is designed for use with incoming water pressure of 400 PSI. The water flow is automatically reduced as it passes through the injector valve, thus reducing the pressure approximately 64%. To obtain the actual working pressure of your Hydro-Force Injection Sprayer, multiply your incoming pressure by 36%. The Hydro-Force Injection Sprayer is factory set to inject chemicals at a 1 to 8 ratio. Other chemicals may be used but should be prepared for a 1 to 8 dilution. The Hydro-Force pressure can be increased by putting a smaller jet at the end of the wand. This will, however, decrease the injection rate of your chemical. Your injection ratio may also change depending on the viscosity (thickness) of your chemical concentrate. The 1 to 8 ratio is based upon chemicals with a similar viscosity to water. The injection ratio can also be slightly affected by your main flow water temperature. This is generally not enough of a change to appreciably change the effectiveness of your system. We do, however, recommend the water temperature be kept below 200 degrees Fahrenheit, as higher temperatures can cause problems on the injection. Pre-Spray and Traffic Lane Applications: Hydro-Force Injection Sprayer eliminates the hassles of measuring and mixing. We recommend you keep an extra 5-quart container or two on your truck to make sure you never run out and to facilitate quick changes of your chemical containers. Remember that Hydro-Force Injection Sprayers automatically mixes at a 1 to 8 ratio. If your 5-quart container is full then that is the same as holding an 11-gallon pump sprayer of regular, ready to use pre-spray. We have found that Hydro-Force Injection Sprayers offer better penetration and overall coverage than most other sprayers. It is therefore possible to pre-spray your jobs up to 45 minutes before you reach that area to be cleaned. An effective way to use the Hydro-Force for pre-conditioning or small to medium jobs is to start at the door coming into the house, spraying all the traffic areas, working your way to the farthest point back in your job. You have then completed your pre-conditioning in just seconds and are prepared to hook up your wand and start cleaning your way out. Keep in that your Hydro-Force is spraying 3 to 4 times the amount of product your normal pump sprayer is putting out. This means you must move quickly to avoid over-applying. Protector should be applied in even, slightly overlapping strokes.
(2) CRC HydroForce Industrial Strength Degreaser 14430, 19 oz Cans
CRC HydroForce Industrial Strength Degreaser 14430, 19 oz Cans MODEL: HydroForceMPN: 14430SIZE: 19 oz Net WtQTY: 2 cans CONDITION: NEW / NOS (contains wear, dust, marks, etc. from open box storage) DETAILS: Disinfects and deodorizes in 1 easy step. Clings to tough vertical or inverted surface soils without runs or drips. Powerful cleaning agents instantly lift-off and eliminate dirt, dust, grease and grime.Efficiently removes dirt, grease, and grime without any residueWorks on bathtubs, sinks, shower stalls, furniture, and moreNon-flammable foam cleaner ensures safe useBactericidal, viricidal abd fungicidalControls mold and mildewEffective disinfectant against HIV, Staph, Salmonella and certain other bacteriaLeaves no sticky residueNSF C1 registered *** YOUR SATISFACTION IS GUARANTEED! CONTACT US FOR ANY ISSUES *** — VIEW AND FOLLOW TD TECH & TRADE HERE: https://www.ebay.com/str/tdtechandtrade — TOOLS, HOUSEHOLD, ELECTRICAL/INDUSTRIAL/MECHANICAL COMPONENTS, COLLECTIBLES, AND MORE NEW ITEMS ADDED CONTINUALLYSHIPPING GLADLY COMBINED(where applicable – simply request total from your cart) *NOTE*As per eBay guidelines, in the event of a return, seller reserves the right to withhold up to 50% of a refund in the event the returned item is not in the same state and/or condition as it was when originally sent, thus causing a decrease in value (i.e. new item returned used, sealed item returned opened, damage caused by buyer, missing parts, additional wear and tear, etc.).Buyers residing in Alaska, Hawaii, a US Protectorate, or APO/FPO, contact us for shipping/purchasing information. Item may ship in recycled / repurposed shipping materials (i.e. boxes, packing materials, etc.).When free shipping is offered, seller reserves the right to select shipping carrier and shipping method.Per eBay policy, Signature Confirmation IS required for items with a total cost (including shipping) of $750 or more. Signature Confirmation MAY be required for items with a total cost of $250 or more (seller’s discretion).Item may be serialized. Reference pictures and/or description for actual serial number, if present.Stock photographs may be used.
CRC HydroForce All Purpose Degreaser 18oz Aerosol Can Lot of 2 NSF Industrial
CRC HydroForce All Purpose Degreaser 18oz Aerosol Can Lot of 2 NSF Industrial Condition: New unused— light surface wear with minor rust spots at the top rims and small scuffs; Features: All purpose industrial-strength degreaser, aerosol spray; NSF Nonfood Compounds Program Listed C1 Color: Purple label on metal can Perfect for: Industrial, automotive, shop and parts degreasing, general heavy-duty cleaning See photos for close-up of condition and accurate sizes.