FastDry HK1800EA (110V/120V) Automatic Hand Dryer/White Metal Cover/Surface
NIB FastDry Brand HK1800EA Automatic Hand Dryer with White Die-Cast Aluminum Cover (110V/120V) The FastDry Model HK1800EA (by Hokwang Industries) is a small, energy efficient hand dryer. The durable one piece cover is constructed of cast aluminum and coated with high-grade white appliance paint. The quiet 100 Watt (3,250 RPM) brushless motor and the 1500W NiChrome heating element are activated by an adjustable infrared sensor (adjustable range is 4 to 6 inches). Dry time is approximately 30 to 35 seconds. But the length of the dry cycle is determined by the user. As soon as the user’s hands are removed from under the unit, the drying cycle is terminated. An air velocity of 3,248 linear feet per minute (or 171 CFM air volume) is produced, but only with minimal sound (63dBA +/-3dBA). At an ambient temperature of 72°F, the HK1800EA heats the out-flowing air to approximately 158°F. Mounting instructions and warranty information are included. This unit is new and in its original box. For the most affordable metal cover, touch-free alternative to paper towels, it’s hard to beat the value and performance of the FastDry HK1800EA. Please Note: This model also available in a wall-plug version (110V/120V Only). This option is helpful if a wall outlet already exists near where the hand dryer is to be installed. (Please see separate listing by this seller for this option; Item No. 160907222736.) In Addition: a 208V/240Volt Model is also available & in stock for immediate shipping. There is no additional charge for higher voltage. (Please see separate listing by this seller for this option; Item No. 170929583239.) Dimensions: 9-3/4 in Wide x 8-3/4 in High x 6-3/4 in Deep; Weight: 11.9 lbs. (unpacked) Electrical Specification: 110/120 Volts; 1800 Watts; 15 Amps; 60 Hz 5 Year Limited Parts Warranty backed by Allied Hand Dryer. Underwriters Laboratory, Inc. (UL) Listed. (In both the United States and Canada) FREE SHIPPING via UPS Ground to anywhere in the Contiguous United States.Expedited shipping available within the Contiguous United States for an additional fee (see shipping tab for details.)SHIPPING to Canada available via UPS Standard for an additional fee (see shipping tab for details.)
TOTO Clean Dry Mod. HDR120#WH (110V/120V) Surface-Mounted High-Speed Hand Dryer
TOTO Clean Dry Model HDR120#WH (110V/120V) Sensor-Activated Surface-Mounted Hand Dryer with White Cover The TOTO Clean Dry™ Hand Dryer Model HDR120#WH is a surface-mounted, high-speed, low-noise, energy-efficient model in classic white color. Rather than blowing air over hands in the open, TOTO’s Clean Dry has an opening where users insert their hands. This model mounts directly to the wall’s surface, but only protrudes into the room 7-3/8″. Operation is fully automatic, with an infrared sensor turning the dryer on & off. To activate, the user stands comfortably and naturally facing the unit. With hands parallel to the wall (fingers pointing down), hands are touchlessly inserted into the drying space. The user slowly withdrawals his hands. With double-sided blowers, both sides of the user’s hands are dried simultaneously. The side panels and integrated water tray capture the droplets of water blown off a user’s hands. The capacity of the hygienic drain tray is an impressive 0.25 gallons. With no water left to trickle down the wall, the dryer, wall, & floor stay free of moisture and water marks. As a result, mold growth is prevented. Hands are fully dry in approx. 12 seconds, but the actual length of the run cycle is determined by the user. The motor shuts off as soon as the user’s hands are no longer detected. An integrated filter scrubs the intake air before the jet air ever reaches your hands. This filter is reusable and can be regularly maintain by simply washing it in the sink with clean water. The energy-efficient motor can produce an air velocity of 18,304 lfm or 208 mph, but does so at a sound level of 57 dB or less…all while consuming only 690 Watts or less. Mounting instructions and warranty information are included. Dimensions: 11-13/16″ Wide x 21-5/8″ High x 7-38″ Deep; Weight: 16.1 lbs.Electrical Specification: 110/120 Volts; 5.75 Amps; 690 Watts; 60 HzOne Year Limited Warranty against Manufacturer Defects.Meets or Exceeds Underwriters Laboratory, Inc. (UL) & Canadian Standards Association (CSA) Requirements.Intertek/ETL Certified in US & Canada; NEC & CEC Code CompliantLEED Credit Eligible (for Optimized Energy Performance) and GreenSpec Listed.FREE SHIPPING via UPS Ground to anywhere in the Contiguous United States.Expedited shipping available within the Contiguous United States for an additional fee (see shipping tab for details).Shipping available to CANADA via UPS Standard for an additional fee (see shipping tab for details).Made in China
FASTDRY Push Button Hand Dryer (Mod.HK1800PS) 110V/120V
NIB FastDry Brand HK1800PS Push-Button Hand Dryer with White ABS Cover (110V/120V) The FastDry Model HK1800PS (by Hokwang Industries) is a small, energy efficient hand dryer. Both the one piece cover and the push button are constructed of white high-grade, fire-retardant ABS plastic (3.0 mm thick). The quiet 80Watt (3,400 RPM) brushless motor and the 1500W NiChrome heating element are activated by a light touch to the front button. Dry time is approximately 30 to 35 seconds, but actual run time is governed by an adjustable timer with a range of 20 to 55 seconds. An air velocity of 3,248 linear feet per minute (or 171CFM air volume) is produced, but only with minimal sound (55dBA +/-3dBA). At an ambient temperature of 72°F, the HK1800PA heats the out-flowing air to approximately 158°F. Because of the plastic cover, the HK1800PS is not recommended where attempted vandalism is anticipated. It is best suited for small, private or employee-only restrooms. Mounting instructions and warranty information are included. This unit is new and in its original box. For the most affordable alternative to your paper towel dilemma, the FastDry HK1800PS (110V/120V) just might be your answer. Please Note: This model also available in a wall-plug version (110V/120V Only). (This option is helpful if a wall outlet already exists near where the hand dryer is to be installed. Please see separate listing by this seller for this option; Item No. 150652387945.) In Addition: a 208V/240Volt Model is also available & in stock for immediate shipping. There is no additional charge for higher voltage. (Please see separate listing by this seller for this option; Item No. 150652383664.) Dimensions: 10-1/2in Wide x 8-3/4in High x 6-3/4in Deep; Weight: 8.4lbs. (unpacked) Electrical Specification: 110/120Volts; 1800Watts; 15Amps; 60Hz 5 Year Limited Parts Warranty backed by Allied Hand Dryer. Underwriters Laboratory, Inc. (UL) Listed. (In both the United States and Canada) FREE SHIPPING via FedEx Ground to anywhere in the Contiguous United States. SHIPPING available via FedEx International Ground to Canada. (See Shipping and payment tab for details.)
FastDry HK1800SS (110V/120V) PushButton Hand Dryer/Stainless Steel/Surface Mount
NIB FastDry Brand HK1800SS Push-Button Hand Dryer with Brushed (Satin) Stainless Steel Cover (110V/120V) The FastDry Model HK1800SS (by Hokwang Industries) is a small, energy efficient hand dryer. The light weight, yet durable cover is constructed of one piece, rust-proof #304 stainless steel. The cover is then brushed to a satin-like finish. The quiet 100Watt (3,250 RPM) brushless motor and the 1500W NiChrome heating element are activated by a light touch to the front button. Dry time is approximately 30 to 35 seconds, but actual run time is governed by an adjustable timer with a range of 20 to 55 seconds. An air velocity of 3,248 linear feet per minute (or 171 CFM air volume) is produced, but only with minimal sound (63dBA +/-3dBA). At an ambient temperature of 72°F, the HK1800SS heats the out-flowing air to approximately 158°F. Mounting instructions and warranty information are included. This unit is new and in its original box. For the most affordable stainless steel covered alternative to paper towels, it’s hard to beat the value and performance of the FastDry HK1800SS. Please Note: This model also available in a wall-plug version (110V/120V Only). This option is helpful if a wall outlet already exists near where the hand dryer is to be installed. (Please see separate listing by this seller for this option; Item No. 160950025375.) Dimensions: 9-3/8 in Wide x 8-1/2 in High x 6-1/2 in Deep; Weight: 11.9 lbs. (unpacked) Electrical Specification: 110V/120 Volts; 1800 Watts; 15 Amps; 60 Hz 5 Year Limited Parts Warranty backed by Allied Hand Dryer. Underwriters Laboratory, Inc. (UL) Listed. (In both the United States and Canada) FREE SHIPPING via UPS Ground to anywhere in the Contiguous United States.Expedited shipping available within the Contiguous United States for an additional fee (see shipping tab for details.)SHIPPING to Canada available via UPS Standard for an additional fee (see shipping tab for details.)
FastDry HK1800ES (110V/120V) PushButton Hand Dryer/White Metal Cover/Surface
NIB FastDry Brand HK1800ES Push-Button Hand Dryer with White Die-Cast Aluminum Cover (110V/120V) The FastDry Model HK1800ES (by Hokwang Industries) is a small, energy efficient hand dryer. The lightweight, rustproof cover is constructed of cast aluminum. All exposed areas of the cover are coated with high-grade white appliance paint. The push button is also constructed of cast aluminum but finished with bright chrome plating. The quiet 100Watt (3,250 RPM) brushless motor and the 1500W NiChrome heating element are activated by a light touch to the front button. Dry time is approximately 30 to 35 seconds, but actual run time is governed by an adjustable timer with a range of 20 to 55 seconds. An air velocity of 3,248 linear feet per minute (or 171CFM air volume) is produced, but only with minimal sound (63dBA +/-3dBA). At an ambient temperature of 72°F, the HK1800ES heats the out-flowing air to approximately 158°F. Mounting instructions and warranty information are included. This unit is new and in its original box. The FastDry HK1800ES is the least expensive hand dryer with a metal cover you can buy. And yet so sure of the quality, we’ll back this unit with a five year parts and/or repair warranty. Please Note: This model also available in a wall-plug version (110V/120V Only). This option is helpful if a wall outlet already exists near where the hand dryer is to be installed. (Please see separate listing by this seller for this option; Item No. 170769753199.) In Addition: a 208V-240 Volt Model is also available & in stock for immediate shipping. There is no additional charge for higher voltage. (Please see separate listing by this seller for this option; Item No. 160722132355.) Dimensions: 9-3/4 in Wide x 8-3/4 in High x 6-3/4 in Deep; Weight: 11.9 lbs. (unpacked) Electrical Specification: 110/120 Volts; 1800 Watts; 15 Amps; 60 Hz 5 Year Limited Parts Warranty backed by Allied Hand Dryer. Underwriters Laboratory, Inc. (UL) Listed. (In both the United States and Canada) FREE SHIPPING via UPS Ground to anywhere in the Contiguous United States.Expedited shipping available within the Contiguous United States for an additional fee (see shipping tab for details.)SHIPPING to Canada available via UPS Standard for an additional fee (see shipping tab for details.)
FastDry HK-JA01 (110V/120V) JETAirflow White Steel Hand Dryer w/ FREE Wall Plug
FastDry Brand HK-JA01 Jet AIRFLOW High-Speed Hand Dryerwith Steel Cover with White Porcelain Enamel & FREE Wall Plug (110V/120V) The JA-Series Jet Airflow hand dryer (by Hokwang Industries) is FastDry’s entry to the 10 to 15 second, fast-drying classification of hand dryers. The most unique feature of the HK-JA is its variable speed motor and adjustable heating element. With the help of a small screw driver (not included), the owner can adjust the motor speed and heating element with the turn of a hidden screw. Like a dimmer switch in your home, the speed & heat can be set to any point between the maximum and minimum settings. With this one adjustment, the owner can customize the air flow, dry time, sound quality, and energy consumption to fit any application environment. At its highest motor speed and heating element setting, the Model HK-JA is capable of taking the user’s hands from wet to dry in 10 to 15 seconds (3 times faster than traditional dryers). Extremely durable and vandal-resistant, the Model HK-JA01 has a light-weight steel cover. The cover is then finished with a white, high-gloss porcelain enameled paint. The brush-type, dual ball bearing motor operates at a range between 12000 and 18000RPM and is capable of producing an air velocity of 14,872 to 19,800 linear feet per minute or 169 to 225 miles per hour (51 to 68CFM air volume) and a temperature increase of 45°F at hand level (approx. 7 inches below nozzles). Both the motor (350 to 700 Watts) and heating element (450 to 900 Watts) are activated automatically by an adjustable infrared sensor (adjustable range is 2 to 13 inches). Dry time varies on the variable setting, but the length of the run time is determined by the user. As soon as the user’s hands are removed from under the unit, the drying cycle is terminated. An UL approved wall plug (approx. 6ft in length) has been added for additional ease of installation. This option is helpful if an electrical outlet already exists near where the hand dryer is to be installed and a visible chord is not an aesthetic or safety concern. Should the buyer prefer to hard wire the unit through the wall into the back of the dryer, the wall plug can is easily be removed. This unit is new and in its original box. Mounting instructions and warranty information are included. The FastDry HK-JA01 intelligently combines the flexibility you want with the energy efficiency you need, all while providing the performance your customers demand. Please Note: a 208V – 240 Volt Model is also available (without wall-plug) & in stock for immediate shipping. There is no additional charge for higher voltage. (Please specify in notes to seller)Dimensions: 8-5/64″ High x 11-19/64″ Wide x 7-3/32″ Deep; Weight: 12.8 lbs. Electrical Specification: 110V/120 Volts; 6.6 Amps to 13.3 Amps; 800 to 1600 Watts; 60 Hz (Requires a dedicated 15 Amp circuit) 5 Year Limited Warranty against Manufacturer Defects Underwriters Laboratory, Inc. (UL) Listed. (In both the United States and Canada) LEED Credit Eligible (for Optimized & Minimum Energy Performance) and GreenSpec Listed. FREE SHIPPING via UPS Ground to anywhere in the Contiguous United States.Expedited shipping available within the Contiguous United States for an additional fee (see shipping tab for details.)SHIPPING to Canada available via UPS Standard for an additional fee (see shipping tab for details.)
FastDry HK-JA05 (110V/120V) JETAirflow Hand Dryer; Brushed Stainless FREE Plug
FastDry Brand HK-JA05 Jet AIRFLOW High-Speed Hand Dryerwith Stainless Steel Cover with Brushed Finish & FREE Wall Plug (110V/120V) The JA-Series Jet AIRFLOW hand dryer (by Hokwang Industries) is FastDry’s entry to the 10 to 15 second, fast-drying classification of hand dryers. The most unique feature of the HK-JA is its variable speed motor and adjustable heating element. With the help of a small screw driver (not included), the owner can adjust the motor speed and heating element with the turn of a hidden screw. Like a dimmer switch in your home, the speed & heat can be set to any point between the maximum and minimum settings. With this one adjustment, the owner can customize the air flow, dry time, sound quality, and energy consumption to fit any application environment. At its highest motor speed and heating element setting, the Model HK-JA is capable of taking the user’s hands from wet to dry in 10 to 15 seconds (3 times faster than traditional dryers). Extremely durable and vandal-resistant, the Model HK-JA05 has a light-weight steel cover. The cover is then brushed to produce a satin-like finish. The brush-type, dual ball bearing motor operates at a range between 12000 and 18000RPM and is capable of producing an air velocity of 14,872 to 19,800 linear feet per minute or 169 to 225 miles per hour (51 to 68CFM air volume) and a temperature increase of 45°F at hand level (approx. 7 inches below nozzles). Both the motor (350 to 700 Watts) and heating element (450 to 900 Watts) are activated automatically by an adjustable infrared sensor (adjustable range is 2 to 13 inches). Dry time varies on the variable setting, but the length of the run time is determined by the user. As soon as the user’s hands are removed from under the unit, the drying cycle is terminated. An UL approved wall plug (approx. 6ft in length) has been added for additional ease of installation. This option is helpful if an electrical outlet already exists near where the hand dryer is to be installed and a visible chord is not an aesthetic or safety concern. Should the buyer prefer to hard wire the unit through the wall into the back of the dryer, the wall plug can is easily be removed. This unit is new and in its original box. Mounting instructions and warranty information are included. The FastDry HK-JA05 intelligently combines the flexibility you want with the energy efficiency you need, all while providing the performance your customers demand. Please Note: a 208V – 240Volt Model is also available (without wall-plug) & in stock for immediate shipping. There is no additional charge for higher voltage. (Please see separate listing by this seller for this option; Item No. 150981273472.) Dimensions: 8-5/64″ High x 11-19/64″ Wide x 7-3/32″ Deep; Weight: 12.8 lbs. Electrical Specification: 110/120 Volts; 6.6 Amps to 13.3 Amps; 800 to 1600 Watts; 60 Hz (Requires a dedicated 15 Amp circuit) 5 Year Limited Warranty against Manufacturer Defects Underwriters Laboratory, Inc. (UL) Listed. (In both the United States and Canada) LEED Credit Eligible (for Optimized & Minimum Energy Performance) and GreenSpec Listed. FREE SHIPPING via UPS Ground to anywhere in the Contiguous United States.Expedited shipping available within the Contiguous United States for an additional fee (see shipping tab for details.)SHIPPING to Canada available via UPS Standard for an additional fee (see shipping tab for details.)
FastDry HK1800ES PushButton Hand Dryer FREE Wall Plug (110/120V) Metal Cover
NIB FastDry Brand HK1800ES Push-Button Hand Dryer with White Die-Cast Aluminum Cover and FREE Wall Plug (110V/120V) The FastDry Model HK1800ES (by Hokwang Industries) is a small, energy efficient hand dryer. The lightweight, rustproof cover is constructed of cast aluminum. All exposed areas of the cover are coated with high-grade white appliance paint. The push button is also constructed of cast aluminum but finished with bright chrome plating. The quiet 100Watt (3,250 RPM) brushless motor and the 1500W NiChrome heating element are activated by a light touch to the front button. Dry time is approximately 30 to 35 seconds, but actual run time is governed by an adjustable timer with a range of 20 to 55 seconds. An air velocity of 3,248 linear feet per minute (or 171CFM air volume) is produced, but only with minimal sound (63dBA +/-3dBA). At an ambient temperature of 72°F, the HK1800ES heats the out-flowing air to approximately 158°F. Mounting instructions and warranty information are included. An UL approved wall plug (approx. 6ft in length) has been added for additional ease of installation. This option is helpful if an electrical outlet already exists near where the hand dryer is to be installed and a visible chord is not an aesthetic or safety concern. Should the buyer prefer to hard wire the unit through the wall into the back of the dryer, the wall plug can is easily be removed. This unit is new and in its original box. For the most affordable metal cover, plug-and-use alternative to paper towels, it’s hard to beat the value and performance of the FastDry HK1800ES. So sure of the quality, we’ll back this unit with a five year parts and/or repair warranty. Please Note: a 208V-240Volt Model is also available (without wall-plug) & in stock for immediate shipping. There is no additional charge for higher voltage. (Please see separate listing by this seller for this option; Item No. 160722132355.) Dimensions: 9-3/4 in Wide x 8-3/4 in High x 6-3/4 in Deep; Weight: 11.9 lbs. (unpacked) Electrical Specification: 110/120 Volts; 1800 Watts; 15 Amps; 60 Hz 5 Year Limited Parts Warranty backed by Allied Hand Dryer. Underwriters Laboratory, Inc. (UL) Listed. (In both the United States and Canada) FREE SHIPPING via UPS Ground to anywhere in the Contiguous United States.Expedited shipping available within the Contiguous United States for an additional fee (see shipping tab for details.)SHIPPING to Canada available via UPS Standard for an additional fee (see shipping tab for details.)
FastDry HK1800EA(110/120V) Automatic Hand Dryer/White Metal Cover/FREE Wall Plug
NIB FastDry Brand HK1800EA Automatic Hand Dryer with White Die-Cast Aluminum Cover and FREE Wall Plug (110V/120V) The FastDry Model HK1800EA (by Hokwang Industries) is a small, energy efficient hand dryer. The durable one piece cover is constructed of cast aluminum and coated with high-grade white appliance paint. The quiet 100 Watt (3,250 RPM) brushless motor and the 1500W NiChrome heating element are activated by an adjustable infrared sensor (adjustable range is 4 to 6 inches). Dry time is approximately 30 to 35 seconds. But the length of the dry cycle is determined by the user. As soon as the user’s hands are removed from under the unit, the drying cycle is terminated. An air velocity of 3,248 linear feet per minute (or 171 CFM air volume) is produced, but only with minimal sound (63dBA +/-3dBA). At an ambient temperature of 72°F, the HK1800EA heats the out-flowing air to approximately 158°F. Mounting instructions and warranty information are included. An UL approved wall plug (approx. 6ft in length) has been added for additional ease of installation. This option is helpful if an electrical outlet already exists near where the hand dryer is to be installed and a visible chord is not an aesthetic or safety concern. Should the buyer prefer to hard wire the unit through the wall into the back of the dryer, the wall plug can is easily be removed. This unit is new and in its original box. For the most affordable metal cover, touch-free, plug-and-use alternative to paper towels, it’s hard to beat the value and performance of the FastDry HK1800EA. Please Note: a 208V/240Volt Model is also available (without wall-plug) & in stock for immediate shipping. There is no additional charge for higher voltage. (Please see separate listing by this seller for this option; Item No. 170929583239.) Dimensions: 9-3/4 in Wide x 8-3/4 in High x 6-3/4 in Deep; Weight: 11.9 lbs. (unpacked) Electrical Specification: 110/120 Volts; 1800 Watts; 15 Amps; 60 Hz 5 Year Limited Parts Warranty backed by Allied Hand Dryer. Underwriters Laboratory, Inc. (UL) Listed. (In both the United States and Canada) FREE SHIPPING via UPS Ground to anywhere in the Contiguous United States.Expedited shipping available within the Contiguous United States for an additional fee (see shipping tab for details.)SHIPPING to Canada available via UPS Standard for an additional fee (see shipping tab for details.)
Excel Automatic Hand Dryer Motion Sensor White Wall Mount TA-ABS-110-120V TA-ABS
Brand New, Never Used. Fast Shipping! BrandEXCEL DRYERManufacturer Part NumberTA-ABS-110-120VDryer ActivationAutomaticHeat SettingAdjustable HeatHeat Setting LevelsHigh; Low; MediumADA CompliantYesVoltage110 to 120V ACSound Level CategoryStandard Sound LevelSound Level66 to 74 dBADry Time14 secCover MaterialsABS PlasticColorWhiteFinishSmoothProduct TypeHand DryerAir Flow Rate16,000 lfmCurrent7.7 AWattage915 WMaximum Air Temperature135 °FCompatible with HEPA FilterNoIncludes HEPA FilterNoIncludesTamper Proof WrenchMount TypeSurfaceNozzle StyleIntregalOverall Depth4 inOverall Height14 inOverall Width9-1/8 inFeaturesAntimicrobial Wall Guards Designed to Protect Walls from Water and Inhibit the Growth of Bacteria; Building Green Approved and Helps Qualify for Several LEED Credits; Washable Pre-FilterStandardsADA Compliant; EPD Certified; Green Product Certified; GSA; HPD Certified; ULSub-brandThinAirUNSPSC47131707Country of OriginUSA